Recently 3 sets of 1500gpm drilling mud cleaner are ready for shipment to drilling company in China, the model is GNZJ594F-3S16NF.
The technical configuration is as below:
The linear motion shale shaker with treating capacity 360m3/h, with 3 sets of 10 inch desander cone, 16 ea of 4 inch desilter cone, all the hydrocyclones are made of 100% polyurethane material for better wear resistance, the bottom shale shaker installed 4 panel composite frame shaker screen, all the shaker screens are tested by independent third party USA company according to API RP 13C. The shaker screen dimension is 585 x 1165mm, features of GN shaker screens including four side tension of mesh during heat press, composite material frame screen to increase the usable area, and repairable to save cost, longer time storage up to 5 years, high performance wire mesh configuration is compliant to API RP13C with longer screen life. The total screen area is 2.73m2, the deck angle adjustment range is -1 ~ +5°, the adjust G force is up to 7.5G which is provided by 2 ea vibration motor. The vibration motor is made from Italy Oli, Itavibras or US Martin, to be certified by CNEX, IEC EX, ATEX or UL.
The mud cleaner can be made as desander without bottom shaker, desilter without bottom shaker, desander mud cleaner ( desander with bottom shaker), desilter mud cleaner( desilter with bottom shaker) and 3 in 1 mud cleaner.
The mud cleaner is installed after linear motion shale shaker, or after vacuum degasser, the desander cone separation cut point is 45 microns, the desilter cone separation cut point is 20 microns, if the client need to separate more fine solids, middle speed decanter centrifuge will be used for barite recovery, the high speed decanter centrifuge will be used for low gravity solids separation.