Month: March 2015

As is known to all and recognized by more
and more people, a waste management system is more and more important for an
oil and gas drilling jobsite. In some countries, there are strict laws that
without a drilling waste management system,
the drilling rig is not allowed to start.

Nowadays, the most popular waste management
system is combined by a vertical cuttings dryer and a high speed decanter
centrifuge. The vertical cuttings dryer is working like a washing machine’s
drying process, and the liquid phase discharged by the vertical cuttings dryer
falls into a tank under the cuttings dryer, and then transferred to the
centrifuge for further treating.

GN Solids Control is very professional in
manufacturing such waste management systems. Just in year 2014, GN has produced
tens of similar systems with one of GNCD930C/CVFD vertical cuttings dryer
and a GNLW363CG/CG-VFD decanter centrifuge.
Such systems are working well at jobsites of many countries and places,
including Shell’s and Baker Huges’jobsites.

Although all such systems are for further
separating the drilling cuttings discharged by solids control system in former
phase and they are nearly same, but since each jobsite is different, the
feeding method differs a bit. Per the layout of jobsite and the material
conditions, there are mainly 3 kinds of feeding methods:

1.      Using
a hose pump for transporting the material into the vertical cuttings dryer. A
hose pump itself is small in size. It has some self suction function, but not
so common as following two methods.

2.      Using
a screw conveyor (auger) and a screw pump for feeding the
vertical cuttings dryer.

3.      Using
two screw conveyors for feeding, one is horizontal and the other is a slope
one.

In both above mentioned methods, the first
screw conveyor could have a hopper for collecting drilling cuttings.

No matter which method is chosen for a
certain jobsite, it depends on the jobsites’ space and requested layout, and
also affected by material condition as the density and viscosity. May you have
requests for this, welcome to contact us freely and our engineer will make out
for you the most suitable solution.

GN Sales team and one set of GNLW363BG Decanter Centrifuge hadattend Nigeria Oil Show in ICC Center in Abuja, Capital of Nigeria last week
and now GN Sales team was back from Africa and the above mentioned decanter
centrifuge was left there, sold to a customer whose main business is oil and
gas drilling waste management.

Although the crude oil price has dropped to
a historically low place, and as a country whose 70% income comes from oil,
Nigeria’s currency Naira’s value is lower than before, this Oil Show held in
Abuja still attracted lots of visitors from domestic and outside Nigeria. Abuja’s
ICC Center is located in the center city, at the first day of Oil Show, the
country’s most important political and economical leaders had attended the
Show.

Many local companies and companies from
abroad who have branch companies attended this show, comparing with their fancy
stands well decorated, GN’s stand was a bit plain. But GN was the only Chinese
company who brought with it a real product, a Decanter Centrifuge GNLW363BG. Its
shining bowl made of SS2205 attracted many visitors’ eyeballs. Many waste
management service providers showed their interest in GN’s standard waste
management system combined with GNCD930 Vertical cuttings dryer and GNLW363BG
Decanter centrifuge.

If you missed Abuja Oil Show, don’t worry.
In the coming week, GN will show the newest designed equipments and systems in
CIPPE Beijing and in May, in OTC in Houston.

What GN will show in CIPPE:

1.      
Complete series of GNLW
Decanter centrifuges, GNLW363CG-VFD, GNLW452, GNLW223, GNLW553.

2.      
GN standard waste management
system, combined by GNCD930 Vertical cuttings dryer and GNLW363CG Decanter
centrifuge, with skid and tank.

3.      
GN 500 GPM mud system for HDD
project.

4.      
All GN main equipments used for
Oil and Gas drilling solids control system including shale shaker, mud cleaner,
vacuum degasser and etc.

Related Arciels:

• Dredging Slurry Rapid Dewatering System for Water Solution
• Celebration of GN and EMEC Cooperation on Decanter Centrifuge
• GN Mud System for 2000HP Drilling Rig
• Desanding Plants to Asian country
• Mining Industry Slim Hole Drilling Application in Oil Exploration
  

NASTT’sNo-DIG show is one of the most professional NO-DIG show for HDD, bored piles,
under-ground construction, TBM industry, the exhibitors are from most of
underground utilities. This is the first time for GN
solids America to attend this show,
welcome to visit our stand and check our equipments information.

Time:
March 15-19, 2015

City:
Danver, CO

Stand
No.: 831

What
equipments will we show? Mud mixing unit, it is widely utilized in HDD mud recycling system
and underground working site. It is a combination of mud hopper, centrifugal
pump, electric control panel, pipes all in one skid for convenient operation
and trasnportation.

Not
only for HDD mud recycling system, our mud mixing unit can be also used for
CBM, geothermal, oil drilling and all other works with drilling mud. We provide
9 models jet mud mixer for option, with 4inch hopper and 6 inch hopper.

If
you will miss this show, you can still visit our warehouse in Houston, http://www.gnsolidsamerica.com,
or visit GN at OTC 2015( May 4~7) in Houston, http://www.gnsolidscontrol.com/drilling-fluids/gn-solids-control-otc-2015-oil-show
. If you will travel to Canada in May or June, welcome to visit us at CIM 2015
in Montreal, QC and Global
Petroleum Show 2015 in Calgary, AB. For more info of these shows, pls contact
GN solids sales.

We
provide customized mud recycling system/ mud
cleaning system for your different
applications with treating capacity 150gpm, 200gpm, 350gpm, 500gpm, 800gpm,
1000gpm, 1500gpm, also we have standard 120m3/h, 240m3/h, 50m3/h bored piles
desander unit, with standard drawing and reliable performance proved by a lot
of clients. We can also design the mud system based on your rig model, mud pump
flow rate, pls contact our sales team for a proper solution.

We
have the standard equipments in stock in our Houston warehouse for fast
delivery, and the spare partsa and technicians are available there.

Related Arciels:

• How to select proper centrifuge for project
• Introduction of shaker screen blinding
• Drilling liquids Bentonite and Barite
• Choose the right centrifuge for drilling waste management
• Why Drilling Mud Services Company Choose GN Solids Control

After a long holiday, which is the longestholiday in China, GN is back to work with full energy. Spring festival is mostimportant festival for every Chinese. After spring festival, according toChinese calendar, the new year starts. GN Solids Control is having a great start full of new orders.

Just before the holiday, GN has dispatched
20 sets of centrifuges to loading port, these centrifuges will arrive to
different countries in Middle East and Africa. In order to finish this order in
time, GN Producing department has been working around clock for at least 50
days.

Among all the equipments used for oil and gas solids control and waste
management, Decanter Centrifuge could better show a manufacturer’s
capability for producing. Each year, GN produce around 150 sets centrifuges,
and 70% of those are exported.

What Centrifuges does GN produce?

1.      High speed Decanter Centrifuge GNLW363C
series decanter centrifuge. This is 14 inch bowl decanter centrifuge,
and very popular size and design. For the same model, GN has highest
configuration and economic configuration available. The highest configuration
is suitable for waste management use and also regarded perfect as dewatering
centrifuge. The economic configuration is suitable for separating the fine
particles for solids control system. For each configuration, there are fixed
speed and VFD controlled available.

2.    Middle
Speed Decanter Centrifuge GNLW452, with a 18 inch diameter bowl. In some cases,
it is regarded as big bowl centrifuge. it is perfect in practice for recovery
the barite in solids control system. It has only one motor, and a middle speed
of 1800RPM.

3.      Big
Bowl Decanter Centrifuge GNLW553VFD Centrifuge, with 22 inch diameter bowl, and
71 inch long. It is a bigger sized GNLW363C decanter centrifuge.

4.      Baby
Centrifuge, GNLW223, the bowl diameter is only 9 inch, it is commonly used for
diamond drilling or some mining projects.

Among those above mentioned decanter
centrifuges, GNLW363CG-VFD is the best seller. And it is always used for
drilling waste management systems together with other equipments for further
treating the drilling cuttings from a solids control system. For WBM systems,
they always use high-G dryer shaker, and for OBM
and SBM, they always use vertical cuttings dryer. Both
mentioned extra equipments are available by GN Solids Control. 

May you need more information, pls contact
us freely.

Related Arciels:

• 10sets Mini Centrifuges to Canada, be Prepared for Mining Market
• GN Decanter Centrifuge Working for America Transocean Offshore Rig
• Shale Shaker with Top Vibration Motors in Drilling Industry
• GN dewatering unit
• Drilling fluid in centrifuge process