Recently one batch of screw conveyor and screw pumps are shipped to African drilling waste management company. The equipments list are as below:
- 10 sets of Variable Speed Screw Conveyor: GNSC12B-12V, the speed adjustment method is manual adjustment. The screw diameter is 12 inch, the screw length is 12ft, the capacity is 20 ton/ hour, the motor power is 5.5KW, the screw speed is 50~60 rpm.
- 3 sets of manual adjusted speed screw conveyor GNSC12B-24V, the screw diameter is 12 inch, and the screw length is 24 ft. the screw conveyor can be used to transfer drilling waste (for both water based drilling waste and oil based drilling cuttings), it can be installed horizontally (to collect drilling waste from solids control shale shaker, desander, desilter), and also it can be installed slantly to transfer the drilling waste to vertical cuttings dryer system. The quick open cover system make it convenient for observation and maintenance. The design of sealing rubber with the cover plate to avoid the leakage during working. We can provide pull wire switch for safety purpose as per client’s requirement. The hanger bearing is from reliable brand FAG or SKF for reliable operation. The flights inside the screw is made of wear resistant material, it can also be sprayed with wear resistant coating as per client’s requirement.
- 8 sets of Variable Speed Screw Pump: GNG30B-075V, the screw pump can be used as decanter centrifuge feeding pump. The manual speed adjust screw pump can control the feeding rate of the fluids to the decanter centrifuge, so that the decanter centrifuge won’t be blocking due to overloading.
- 2 sets of manual adjust speed screw pump GNG10B-040V, this model screw pump can be used as flushing pump of vertical cuttings dryer.
- 10 sets of Control panel