Recently 2 sets of drilling mud dewatering centrifuge units are ready for shipment for Europe client. Each set of dewatering centrifuge unit including 1 set of GNLW364FT dewatering centrifuge, 1 set of chemical dosing system, 1 set of feeding screw pump and 2 sets of containers.
The GNLW363FT dewatering centrifuge is a 2 phase separation decanter centrifuge, the bowl diameter is 14 inch, the bow length is 59.5 inch, the bowl L/R ratio is up to 4.2, the max speed is 3900rpm, the max G force is up to 3063G, the beach angle will be designed as per the application.
The bowl main parts are made of duplex stainless steel SS2205 or SS2304 by centrifugal casting, which is superior to the performance of SS304 or SS316L. The slag outlet and mud distribution port is protected by the replaceable hard alloy sleeve, the carbide scraper are installed on the top and side of the slag discharge port of the bowl. The main material of the screw is duplex stainless steel SS2205 or SS2304. The centrifuge main motor, back motor and pump motor is controlled by the positive pressurized VFD control panel. The centrifuge feeding pump is made of Netzsch brand screw pump to adjust the feeding rate by adjust the motor frequency.
The chemical dosing system is customized design as per client’s requirement, including automatic powder chemical dosing system and manual liquid chemical dosing system, it can be used for both powder chemical and liquid chemical preparation, storage and dosing.
All the equipments are installed in the container for convenient transportation and operation.
Except for GNLW363FT dewatering centrifuge, GN solids control also produce other size decanter centrifuge, including 9 inch bowl, 14 inch bowl, 18 inch bowl, 22 inch bowl, 30 inch bowl, with L/R ratio 3 or 4 for different requirement.