Author: gnadmin

Recently one batch of mud gas separator and mud guns are ready for delivery to Middle East client.

The mud gun and mud agitator are used in combination to prevent solid sedimentation of drilling mud, or to transfer mud; The quantity of mud guns depends on the size of the mud tank and is usually installed on the mud pipeline of the mud tank;
The pressurized mud flows into the mud gun through an external mud line ( customized configuration). By using the three nozzles at the bottom of the mud gun (designed at a 120 ° angle), the internal mud is sprayed out to achieve the purpose of transfering mud or cleaning the mud tank.
According to the structural characteristics, there are 2 types mud guns for mud tank system, one is fixed type with rotation angle 0º, one is rotary type with rotation angle 360º. According to the size of the gun inlet, it is divided into 2 inch mud gun and 3 inch mud guns. The three nozzles are designed with a 120 ° angle, allowing even a fixed mud gun to radiate the mud tank in all directions. For a rotating mud gun, it can radiate the mud tank without blind spots. The rotary mud gun adopts a foldable handle design, which is convenient and safe, optional gate valve, butterfly valve, or ball valve .The nozzle is made of polyurethane material, with a lifespan of up to 2000 hours.

The mud gun is consist of rotor, nipple, elbow pile clamp, gun body, nozzle four way, nozzle, handle assembly, fastener, stabilizer. The mud gun length is according to mud tank inner dimension, which will be confirmed by GN solids sales.
For more information of mud gun, mud agitator and mud gas separator, pls contact with GN solids sales.

Recently one set of drilling waste management packaged equipments are shipped to Europe client. The package is a customized drilling waste management system including drilling cuttings feeding modular, high G drying shaker treatment modular, drilling cuttings vertical cuttings dryer modular and screw conveyor transfer modular.

The drilling cuttings feeding modular including the cuttings collection hopper to collect the drilling cuttings from solids control system primary shale shaker and drop into the oblique installed screw conveyor feeding port, then the drilling cuttings will be transferred automatically to high G drying shaker separation modular.
The high G force drying shaker is utilized to separate the water based drilling cuttings and reduce the solids content, to get drier drilling cuttings. It can be also used before vertical cuttings dryer, to reduce the solids content and reach better treatment result of the vertical G dryer.

The vertical G dryer modular is mostly used to treat the oil based drilling cuttings, the treatment result will depend on the material conditions, which is installed on the telescopic skid with flushing pump and VFD control panel which is cooled by condensing tube. The discharged cuttings with oil on the cuttings less than 5% which can be used for land fill or send to thermal desorption unit for further treatment until the oil content below to 1%. The VFD control panel is a positive pressurized VFD control panel with PLC smart control and touch screen, the inverter and other electric components are all from world famous brand for reliable operation.

The screw conveyor is used to transfer the discharged cuttings to skips or other place automatically as per client’s requirement.
All of the 4 modular package equipments with electric motor and control panel which are comply with ATEX explosion proof to meet Europe explosion proof standard and safety standard.

As the demand for efficient and environmentally friendly drilling waste management solutions continues to rise, the need for innovative and effective equipment becomes increasingly crucial. In response to this growing demand, our company is proud to introduce our comprehensive Drilling Waste Management Packaged Equipment, specifically tailored for our Europe clients. This cutting-edge equipment is designed to address the challenges of drilling waste management while ensuring high performance and compliance with environmental regulations.

The Drilling Waste Management Packaged Equipment consists of four essential modules, each playing a critical role in the efficient and effective management of drilling waste.

1. Drill Cuttings Feeding Module:
The drill cuttings feeding module is the initial stage of the waste management process. This module is designed to efficiently and effectively receive and process drill cuttings, separating them from the drilling fluids. The system is equipped with advanced technology to ensure the thorough and accurate separation of cuttings, thereby optimizing the recovery of valuable drilling fluids and reducing waste volumes.

2. High G Drying Shaker Processing Module:
The high G drying shaker processing module is designed to further process the separated drill cuttings to achieve optimal drying and separation of solids and liquids. This module is equipped with high G-force vibratory motion to effectively remove excess drilling fluids from the cuttings, resulting in drier cuttings and higher recovery of drilling fluids. The efficient processing of drill cuttings in this module significantly reduces waste volumes and minimizes environmental impact.

3. Drill Cuttings Dryer Module:
The drill cuttings dryer module plays a crucial role in the final stage of the waste management process. This module is designed to further reduce the moisture content of the drill cuttings, resulting in drier solids and further recovery of drilling fluids. The use of advanced technology in this module ensures the effective treatment of drill cuttings, meeting the stringent requirements for environmental protection and waste disposal.

4. Screw Conveyor Module:
The screw conveyor module is responsible for the efficient and continuous transportation of the processed drill cuttings. This module is designed to handle the transfer of dry cuttings from the processing units to the designated storage or disposal area. The screw conveyor system is equipped with advanced features to ensure the smooth and reliable transfer of drill cuttings, minimizing manual handling and maximizing operational efficiency.

In addition to the individual functionalities of each module, the Drilling Waste Management Packaged Equipment is integrated with intelligent control systems to enable seamless operation and monitoring. The automation and control features of the equipment enhance operational safety, efficiency, and real-time data monitoring.

With the increasing focus on environmental sustainability and regulatory compliance, our Drilling Waste Management Packaged Equipment offers a reliable and efficient solution for Europe clients. This comprehensive equipment package is designed to meet the specific needs and challenges of the European market, providing a sustainable approach to drilling waste management.

In conclusion, represents a significant advancement in the field of drilling waste management, offering a comprehensive solution for the efficient processing and treatment of drill cuttings. With its advanced modules and intelligent control systems, this equipment is poised to make a positive impact on the drilling industry in Europe, ensuring compliance with environmental standards and promoting sustainable drilling practices.

Recently one batch of solids control equipments are ready for shipment to our Indonesia client, it is for 4 sets drilling rig solids control system. The solids control equipments are separately from the drilling rig package and mud tank system. GN solids control have over 15 years experience to provide professional solids control equipments and customized solids control system for drilling companies all of the world.

Each set drilling rig solids control equipments including 2 units of GNZS594J-SHBJ linear motion shale shaker, 1 unit of mini desander GNZS752J-2S, 1 unit of mini desilter GNZS752J-12N, 1 unit of mud gas separator GNZYQ-1000A, several units of mud agitators, etc.

We can provide different type of desander and desilter according to clients’ requirement, we have desander unit without bottom shaker, which can be used separately as desander, we also have desander unit with bottom shaker, as desander cleaner, the bottom shaker can be mini shaker or GNZS594J-SHBJ 4 panel shale shaker, when mini shaker is utilized, the mini desander unit can be used for the low treating capacity condition, like 500gpm, 1000gpm. It is recommend to use the big shaker( 4 panel underflow shaker) for the high treating capacity desander, as 1500gpm.

The same as desilter unit, mini underflow shaker can be utilized for 500gpm, 1000 gpm, GNZS594J-SHBJ 4 panel shale shaker can be applied for 1500gpm. Compared with the desander desilter unit without bottom shaker, the mini desander unit and mini desilter unit can recycle more useful drilling fluids and get drier drilling cuttings.
Except for separate mini desander and mini desilter, we can also provide 3 phase separation mud cleaner, which is a combination of desander cone, desilter cone and bottom shale shaker. 2 ea of centrifugal pump will be used as the feeding pump of desander cone and desilter cone.

GN Solids Control, a leading provider of solid control equipment in the drilling industry, is proud to announce the successful sale of four sets of drilling rig solid control systems to a major project in Indonesia. These state-of-the-art systems are equipped with cutting-edge technology and are designed to optimize drilling performance and ensure environmental compliance.

Each set of drilling rig solid control equipment comprises two units of the GNZS594J shale shaker, one unit of the GNZS752J-2S desander, one unit of the GNZS752J-12N desilter, one unit of the GNZYQ-1000A mud gas separator, and several agitators. Let’s delve into the functions and benefits of each component.

The GNZS594J shale shaker is a high-performance vibrating screen designed to remove larger particles and solids from the drilling fluid. With its efficient vibration motion, it effectively separates the cuttings from the drilling mud, allowing for better drilling fluid quality and reducing the wear and tear on downstream equipment.

The GNZS752J-2S desander is specifically designed to remove sand and abrasive particles from the drilling fluid. Equipped with multiple hydrocyclones, it efficiently separates the solids from the liquid phase, preventing them from causing damage to the drilling equipment and improving overall drilling efficiency.

The GNZS752J-12N desilter, on the other hand, focuses on removing finer particles and silt from the drilling fluid. By using a combination of hydrocyclones, it ensures that the drilling mud is free from unwanted solids, which in turn enhances the performance of downstream equipment and minimizes the risk of wellbore instability.

The GNZYQ-1000A mud gas separator is a crucial component in maintaining a safe drilling environment. It is designed to separate the gas from the drilling fluid, preventing gas kicks and allowing for the safe venting of hazardous gases. This ensures the safety of personnel and equipment on the drilling site.

To further optimize the drilling fluid properties, the solid control system is equipped with several agitators. These agitators provide continuous mixing of the drilling mud, preventing the settlement of solids and maintaining a homogeneous mixture that enhances drilling efficiency.

With the sale of these four sets of drilling rig solid control systems, GN Solids Control continues to demonstrate its commitment to delivering cutting-edge solutions to the drilling industry. The advanced technology and superior performance of these systems will undoubtedly contribute to the success of the project in Indonesia, ensuring efficient drilling operations and environmental compliance.

GN Solids Control remains dedicated to providing top-quality solid control equipment and outstanding customer service. As the company expands its global presence, it continues to innovate and develop solutions that meet the evolving needs of the drilling industry.