Recently one set of oil sludge treatment centrifuge unit with tank cleaning unit is ready for delivery to South America client, the system consists of three phase centrifuge separation unit, Inclined plate clarifier module, waste transfer module, chemical dosing unit module, etc.
The technical configuration is as below:
1. Oil sludge treatment centrifuge unit, one unit of three phase separation centrifuge with feeding pump is installed on the mud tank. It is used for oil, water, solids separation, the solids is collected by skips, the water and oil will flow to the oil storage tank and water storage tank under the 3 phase decanter centrifuge, the oil pump and water pump will transfer them to the client’s storage tank automatically, there is liquid level meter in the oil tank and water tank to control the high level and low level.
2. Three module automatic tank cleaning unit, including suction skid with chemical dosing unit, treatment skid with inclined plate clarifier (IPC) and electrical membrane pump, storage skid with holding tank and high pressure pump which suck the treated water to the high pressure cleaning machine. There are 2 high pressure pump, one pump with control panel in use, one pump with separate control panel as back up. Both of the high pressure pump can suck the treated water from fluids holding tank or three phase separation centrifuge unit water storage tank. The treated water in holding tank can be used for high pressure cleaning machine, also it can be treated by the three phase separation centrifuge unit through the feeding pump. The 3 skids are connected with corrosion resistant rubber hose in the same size, they can be placed close to each other as a complete tank cleaning system, also it can be used separated in different place as requirement.