One set of solids and liquid separation equipments are ready for shipment for Canada dredging slurry dewatering system, the equipments list is as below:
- 2 units of GNZS706F-SHBF double deck shale shaker, the top layer screen area is 2.03m2, bottom layer screen area is 2.63m2, total 6pcs screens, top layer 3pcs, bottom layer 3 pcs screens, all of the 6pcs screens are composite material frame shaker screen.2ea of 1.94KW vibration motor drived 7.3G ( adjustable) , deck angle adjustment is -1°~+5°.the top screens are to separate coarse solids from the slurry, the bottom screens are to separate fine solids by using different mesh size shaker screens.
- 1 unit of GNZJ703F-2SF desander mud cleaner
- 1 unit of GNZJ703F-12NF desilter mud cleaner
- 2 units of big bowl slurry dewatering centrifuge GNLW764A-VFD, the bowl diameter is 760mm, the bowl length is 3328mm, the designed treating capacity is 528gpm when solids content in mud is within 20%. The max bowl speed is 2650rpm, typical bowl speed is 0~2200rpm, max G force is 3000G, typical G force is 0~2060G, cut point is 2~5 microns, gearbox ratio is 38:1, the gearbox torch is 25000 N.M, differential speed is 5~28rpm, main motor is 160KW, back drive motor is 90KW, the bowl material is duplex stainless steel 2304 from centrifugal casting, the screw material is SS304, the screw is protected by tungsten carbide tiles, the solids discharge port is protected by tungsten carbide inserts. The bearing brand is SKF for reliable operation. The bearing lubrication system is automatic oil lubrication system, the electric control system is positive pressurized VFD control panel with PLC smart control and HMI interface.
- mud tank for solids liquid separation , 3 units, V bottom with screw conveyor to transfer the solids to solids discharge port continuously,
- 8 units of screw conveyor
- 4 units of centrifugal pumps
