GN solids control produced slurry separation desander plant can be used for pipe jacking, TBM, bored piling, HDD and other slurry separation project. We have standard model desander unit GNMS-200D with 200gpm treating capacity, GNMS-500D with 500gpm treating capacity , GNMS-1000D with 1000gpm treating capacity. We can also produce customized capacity desander plant for our client, recently one unit of GNMS-1500D desander plant are ready for shipment to Asia client, the technical configuration is as below:
Double deck shale shaker equipped 2 ea of 14 inch desander cone, which is inside polyurethane material covered steel outside, the polyurethane material is wear resistant material, the outside steel cover is to prevent the desander cone from deformed. The total treating capacity is 1500gpm. The bottom screen is to separate the coarse solids from slurry, the treated mud dropped into the catching tank, the 75KW centrifugal pump transfer the mud to 14 inch desander cone, the fluids flow out through the outlet pipeline to storage tank, the solids discharged from desander cone nozzle and dropped on the top layer screen to recycle more useful fluids. The whole system is designed as compact unit for convenient operation and transportation. The separation cut point is 45 microns. If user need to separate fine solids, the client can use a separate desilter or mud cleaner to separate solids size 15~45 microns, if the fluids discharged from desilter need to be treated, dewatering centrifuge should be applied further. The dewatering centrifuge with chemical dosing unit can treat the particle size 1~ 5 microns to get clean water for disposal.
If you need large treating capacity TBM slurry separation plant, we have standard model s for option, GNTBM-240 with 240m3/h treating capacity, GNTBM-360 with 360m3/h treating capacity, GNTBM-500 with 500m3/h treating capacity. For more information, pls contact with GN solids sales.