Recently one set of GNTBM-320 TBM Slurry Separation Plant are ready for delivery to China client. The technical parameter is as below:
1. Total power :67KW
2. General treating capacity; 320m3/h (excluding clay layer usage conditions)
3. Basic structure, consists of double deck linear motion shale shaker, hydrocyclones, 55KW slurry pump, 24m3 treatment tank, electric control system, guardrails, pipelines, etc.
The double deck shale shaker with screening area total 8.64m2, the top layer screen opening is 0.5mm, the bottom layer screen opening is 3mm. The vibration motor drived the shale shaker is 2ea of 6KW, with frequency 16HZ. The hydrocyclone installed on top of the double deck shale shaker material is polyurethane inside, outside covered with casting steel, the single cone capacity is 80~180m3/h, the pressure required is 0.06 ~0.2Mpa.
4. Applicable environmental conditions :
Ambient temperature: -18 ¬°C ~+40°C
Altitude height: ≤1000m
Ambient humidity:≤90% (+20°C)
Non explosion proof
5. The equipment can adapt to weather conditions containing 5% sand and dust, as well as rain, snow, fog, etc.Suitable for long distance transportation such as highway, railway, and sea freight, meeting the requirements of crane loading and unloading, and suitable for frequently movement and installation, and it is corrosion and leakage prevention.
6. The TBM slurry separation plant can meet the requirement of pipe jacking construction process.
7. The system design separation cut point is 30 microns, the solids over 30μm can be separated out by the hydrocyclone separation.
The function of the TBM slurry separation system is to pump the drilling mud to the buffer tank of the shale shaker, after separation, the coarse solids are separated out from the shale shaker, the fine solids dropped into the mud tank with the liquids.
For more information of TBM slurry separation plant, pls contact with GN solids control .