Oil sludge treatment equipments, Solids control equipments and drilling cuttings treatment equipments are major equipments produced by GN Solids Control. We can design and produce customized oil sludge treatment system and equipments as client’s requirement. Generally, GN oil sludge treatment system is to use chemicals to wash the oil sludge by heating to 60-70 C degree.
After treatment, the user will get required oil, water and solids. The recycled water will be reused in the circulation system, the recycled oil will be sold or for other use, the discharged solids will be send for final disposal or to further treatment unit.
The oil sludge from crude oil tank cleaning, refinery plant waste oil sludge, drilling waste sludge can be treated by the oil sludge treatment system, including sludge vacuum pump, pre-mixing & heating module, chemical dosing unit, coarse solids separation module, 2 phase decanter centrifuge separation module, 3 phase centrifuge separation module. The major equipments including: Double deck shale shaker, vacuum pump, 2 phase decanter centrifuge, 3 phase decanter centrifuge, screw pump, submersible slurry pump, mud tank with heating lines and accessories.
When using the vacuum pump to pick up the oil sludge from waste pit, an air compressor is used to supply air for the operation, it is a 100% air operated pump without electricity. The discharge horizontal distance is 500 ~1000m, if the outlet pipe size is bigger than inlet pipe size, the transfer distance will be sacrificed. The vertical picking up depth is less than 3m, the clear water picking up depth is up to 9vmeters.
We have GNOST-02C, GNOST-05A, GNOST-15A with 2m3/h, 5m3/h, 15m3/h capacity for option. If you need to get high quality oil and water, lower operation cost and maintenance cost, simple operation, less oil on the discharged solids, pls contact with GN sales engineer.