Drilling Mud Recycling System

GN solids control showed our equipments at Petrotech 2019 in India from Feb. 10th to Feb. 12th. The equipments we showed at the oil show in India including:

1) Sludge vacuum pump: it can be used to transfer drilling cuttings, powder cement, waste sludge, oil sludge, drilling fluids, industry waste water, mining tailings, dredging slurry, sand, even for animal waste, etc. Especially for high viscosity sticky oil sludge from refinery crude oil tank bottom, the vacuum pump is an ideal equipments to transfer the oil sludge, but the flow rate will be different with the normal flow rate. Depends on the different conditions oil sludge, we will choose the proper model for our clients according to the question list they filled.

As a 100% air operation pump, the vacuum pump do not need any electricity to operation, this is pretty convenient in some jobsites when electricity is limited, the user can use the air compressor in the jobsite to provide air for the vacuum pump, they can choose automatic operation or manually operation for their requirement.
2) Centrifugal pump: the complete centrifugal pump is consist of pump head, coupler for motor end, coupler for pump end, electric motor, control panel, skid and other accessories. The pump head is the most important components for the centrifugal pump, our pump head and all the parts are interchangeable with world famous brand centrifugal pump.
3) Shale shaker: the 2 panel shale shaker is the smallest model we have now, we have 2 panel, 3 panel and 4 panel single deck shale shaker for option, also we have dual deck shale shaker for special purpose. Continue reading “GN Showed vacuum pump, shale shaker at Petrotech 2019”

GN solids control will ship 1800pcs shaker screens to our client in Asia after Chinese New Year holiday. All the screens are composite material frame shaker screens, the dimension is 635x1253mm. The screens can be loaded into 2 containers. Our factory will be closed for Chinese New Year holiday from January 29th to February 13th. Pls contact with GN solids control by email freely.

Shaker screens are one of our major products among our products lines. As the professional manufacturer of solids control equipments and drilling waste management, our products line including linear motion shale shaker, mud cleaner, desander, desilter, decanter centrifuge, vacuum degasser, centrifugal degasser, mud gun, mud agitator, centrifugal pump, submersible slurry pump, sludge vacuum pump, mud gas separator, mixing hopper and jet mud mixer, flare ignitor, screw pump, screw conveyor, high G drying shaker, vertical cuttings dryer, mud tank, complete solids control system and drilling cuttings treatment system. Also we can produce cuttings solidification unit, Thermal Desorption Unit, Oil sludge separation unit, chemical dosing unit, and HDD & CBM mud recycling system, TBM desander unit, Solids removal unit, Dredging slurry separation unit.

GN shaker screens are produced in our second factory workshop, every month we shipped thousands of shaker screens to USA, Russia, etc. over 70 countries in the world, most of them is from repeat order for good quality and competitive price. Features of GN composite material shaker screens:
1) All the screens over 60 mesh use 3 layers wire mesh for longer working life.
2) Four sides pre-tensioned shaker screens for reliable working performance.
Continue reading “1800pcs shaker screens ready for shipment to Asia”

GN solids control welcome our clients to take the sample materials to our facility to test by our decanter centrifuge, this is to let the client to know exactly the separation result clearly, and the operation method communication, this is a good way for the client to “watch the factory and watch the testing” before order.

GNLW224D mini decanter centrifuge is widely used to treat mining waste water recovery, industry waste water treatment, chemical slurry separation, animal waste separation, etc. projects. It is a single motor decanter centrifuge with VFD control panel, we can control the flow rate of the Netzsch brand screw pump by adjust the frequency of the motor, and set different differential speed to treat different fluids. The smaller of the differential speed, the drier of the discharged solids, the more clear of the discharged water. When increased the feeding flow rate, the discharged water might be less clear, the solids moisture is also increased. The max speed is 4500rpm, typical speed is 3800 rpm and the max G force is 2492G.

GNLW224EP-VFD is much better to treat the industry waste water, it is a 2 motor decanter centrifuge with main motor and back drive motor with VFD control panel. The smallest differential speed can be adjusted to 1 rpm, this can promise the discharged water very clear to meet the client’s requirement, and the solids moisture can also meet the limit. The max speed is 5000rpm, typical speed is 0~4500 rpm and the max G force is 3077G. The high G force ensures the better separation of the fine solids.

Continue reading “Decanter Centrifuge for Aluminum Hydroxide Slurry Dewatering”

Recently GN Separation & Conveying Equipment Company release new website, http://www.gnseparation.com/ , welcome to check our equipments information and industry news from our website. For the solids control equipments and drilling waste management equipments and oil sludge separation system information, pls check our website www.gnsolidscontrol.com, also you can check the working video and project news from this website.

Our major separation and conveying equipments including:
1) Decanter centrifuge for waste water treatment, mining & industrial sludge/ tailings treatment, chemical treatment. The bowl size available is 9 inch bowl, 14 inch bowl, 18 inch bowl, 22 inch bowl, 30 inch bowl with different treating capacity, and each bowl size have ratio available for 3 or 4 or 4.2. By the different requirement for the discharged solids moisture and discharged water clearance, different ratio ( bowl length / bow diameter) will be choosed, and the bowl angle is customized for different material.
2) Conveying Equipment: Screw Conveyor, Bucket Elevator for bulk material handling.

3) Transfer pump: Centrifugal pump, solids vacuum pump, screw pumps. The vacuum pump is widely used to transfer the cement, animal waste, oil sludge, drilling cuttings, drilling fluids, oil contaminated soils and other materials. It is 100% air operation pump without electricity power supply, it is ideal equipment to work in the electricity limit area. The air compressor is required to provide air supply for the vacuum pump operation. Centrifugal pump is interchangeable with world famous brand centrifugal pump installation and parts, it can be used as mixing pump, feeding pump of desander, desilter, trip pump, super charging pump, transfer pump of oil sludge. Screw pump is normally as feeding pump of decanter centrifuge and flushing pump of vertical cuttings dryer.

Continue reading “GN Separation & Conveying Equipment Company release new website”

This week GN solids control shipped one batch of mud transfer pumps and mud agitators to Asia client. The centrifugal pumps are 100% interchangeable with world famous brand centrifugal pump, we can provide bare pump head and all the parts and the whole centrifugal pump with motor, skid, coupler, and control panel.

Features of GN centrifugal pump:
1. The impeller and pump casing is made of hard ductile iron alloy, which is abrasion resistant material and can longer the working life of the centrifugal pump. Different with the other competitors grey steel material, it is easily break.

2. The bearing is top brand bearing for reliable operation, the client do not need to repair the pump time and time and delay their operation.
3. The mechanical seal is also an important wear parts for the centrifugal pump, for better sealing and zero leakage and longer working life.
4. The mounting skid of the centrifugal pump is made from casting instead of welding to provide the reliable operation and less vibration for longer working life.

Mud agitator is one of the mixer equipment to be installed on top of the mud tank, together with tank bottom mud gun for better agitating and mixing of the drilling fluids in the mud tank, to prevent the drilling fluids to be accumulated in the tank bottom. The direct connection mud agitator design is with compact size, convenient operation, maintenance and customized agitator shaft length and impeller size for better performance.

Continue reading “Mud transfer pumps and mud agitators shipped to Asia cleints”