One set of oil sludge treatment system ready for delivery to South America

Recently one set of oil sludge treatment system are ready for delivery to South America client. This is a customized 2 phase separation oil sludge treatment system for client’s project.
The technical configuration is as below:
1. The first mud tank work as dilution liquid storage tank and coarse solids separation module with double deck high G drying shaker with spray system and closed cover to prevent oil sludge splashing, the continuous spraying with dilution liquid will reduce the shaker screen blinding by the high viscosity oil sludge. A submersible slurry pump is used to transfer the dilution liquid to high G drying shaker, decanter centrifuge flushing line, decanter centrifuge dilution line.

The electric steam generator provide hot steam to the heating lines around the mud tank to heat the oil sludge
2. The second mud tank acts as a centrifuge separation module with 2 phase decanter centrifuge or 3 phase decanter centrifuge, by using the 2 phase decanter centrifuge, the solids and oil water mixture fluids will be separated, the fluids will drop into the mud tank and transfer to truck wagons by submersible slurry pump, the solids will be sent to disposal, working with proper chemicals, which will increase the treatment efficiency and get better treatment result.


When 3 phase decanter centrifuge is used, the oil, water and solids are separated out, the oil and water will flow to 2 different compartment as oil storage tank and water storage tank, the water can be recycled in the treatment system, the oil can be sent to the user, the solids will be sent to disposal.
3. The vacuum pump will pick up the oil sludge from the waste pit to the screening module with a buffer box to reduce the pressure.
4. Chemical dosing unit and air compressor, electric heater will be prepared by the user.

2 sets of 500gpm mud recycling system ready for shipment to South America

Recently 2 sets of 500gpm mud recycling system are ready for shipment to South America, this is customized mud recycling system based on GNMS-600B self contained 600gpm mud recycling system. The technical configuration is as below:


1. 3 phase cleaning mud cleaner,which consists of double deck shale shaker, desander cone, desilter cone, the separation cut point is 15 microns. The bottom layer shaker screen can be used as coarse solids separation shale shaker, the top layer shaker screen works as mud cleaner shaker screen. 2ea of 2.6HP vibration motor drived the double deck shale shaker, with bottom 3 panel shaker screens and top 3 panel shaker screens .The drilling fluids treated by bottom shaker screen dropped into the sand trap, the desander feeding pump suck the drilling fluids and feed to desander cone, the treated mud dropped in to desander compartment, the desilter feeding pump suck the drilling fluids and feed to desilter cone, the clean mud flow to desilter compartment, it can be reused or mixed with chemical additives to prepare for new drilling fluids.


2. Mixing hopper with mixing pump
3. Feeding pump for desander cone and desiter cone
4. Mud tank with accessories, electric control system
5. Mud agitator and mud gun
The 500gpm mud recycling system can be applied for HDD & CBM projects, also it can be used for mining separation, waste water recycling and other construction slurry separation projects. Except for 500gpm mud recycling system, we also have 200gpm, 350gpm, 600gpm, 800gpm, 1000gpm, 1500gpm mud recycling system, and 200gpm, 500gpm, 1000gpm desander unit for TBM & Piling projects.
Also we have 240m3/h, 360m3/h, 500m3/h, 800m3/h, 1000m3/h, 2000m3/h, up to 3000m3/h TBM slurry separation plant for both micro tunneling project and Middle/Large TBM Construction. For more information of mud recycling system, pls contact with GN solids control.

Mud Recycling Unit for overseas Trenchless Projects

Recently several sets of mud recycling system are ready for shipment to overseas trenchless projects.


The trenchless mud recycling system is a specialized equipment setup used in horizontal directional drilling (HDD) and other trenchless technologies. Its primary function is to clean drilling fluids (commonly known as mud) during the drilling process. The purpose is to use the trenchless mud recycling system is that the recycling drilling fluids can be used to lubricate the drill bit, stabilize the borehole, and carry cuttings back to the surface. These fluids need to be constantly circulated and maintained to ensure efficient drilling and environmental compliance.


Environmental Benefits: Recycling systems help minimize waste and reduce the environmental impact of HDD operations by reusing drilling fluids.
Operational Efficiency: By continuously recycling and maintaining drilling fluids, these systems contribute to the efficiency of trenchless drilling operations, reducing downtime associated with replacing fluids and improving overall productivity.
The basic configuration of a mud recycling system is consists of primary shale shaker, mud cleaner, feeding pump, centrifugal pump, mud agitator, decanter centrifuge, mud tank, etc.


The compact design mud cleaning unit consists of double deck shale shaker with hydrocyclones, the bottom layer shaker screen works as primary shale shaker to separate coarse solids from the drilling mud, the clean fluids dropped into the intermediate tank, the feeding pump feed the mud to hydrocyclones for second phase cleaning, the top layer shaker screen as mud cleaning drying screen to recycle more fluids. The clean fluids flow to client’s storage tank or mixing tank to prepare for new drilling fluids.
The hydrocyclone size is for optional for different applications, for TBM and Pilings, 10 inch, 12 inch or 20 inch can be selected; for HDD applications, 10 inch, 4 inch can be used. For more information, pls contact with GN solids sales.

 

1500HP Drilling Rig Solids Control System for Africa Project

Recently one package of 1500HP drilling rig solids control system are ready for delivery to Africa project. The technical configuration is as below:


1. Solids control shale shaker GNZS594J-SHBJ, 3 units, each unit with 4 panel shaker screen which is with composite material frame and stainless steel wire mesh 2 or 3 layers by 4 sides pretension.
2. Centrifugal degasser GNZCQ-1200, 1 unit
3. Desander unit GNZJ591J-M2SF, 1 unit , with 2 ea of 10 inch desander cone, the general treating capacity is up to 1000gpm of drilling fluids.
4. Desilter unit GNZJ591J-M16NF, 1 unit, with 16 ea of 4 inch desilter cone, the total treating capacity is up to 1500gpm of drilling mud.


5. Centrifugal pump in different size for different applications, including 5 units of GNSB8x6-14J (75KW) centrifugal pump, 3 units of GNSB8x6-13J (55KW) centrifugal pump, 5 units of GNSB4x3-12J (15KW) centrifugal pump and shear pump GNJBQ6*5-750 (75KW), 3 units of mixing hopper (H)JM-200, these centrifugal pump can be used as transfer pump, trip pump, mixing pump, charging pump, feeding pump.


6. High speed decanter centrifuge GNLW363D-GP, 1 unit, to separate the fine solids from drilling fluids and keep it balancing. The centrifuge is 14 inch bowl diameter with 50 inch bowl length, the max speed is up to 3600rpm and the max G force is 3063G, the separation cut point is 2~ 5microns, if need to separate more fine solids, chemical dosing unit can be used together with the centrifuge by adding chemicals in the inlet tube.
7. Mud agitators installed on the mud tank for drilling mud agitating and mixing, including 7 units of 20HP mud agitator, 2 units of 15HP mud agitator, 1 unit of 7.5HP mud agitator.
8, Customized mud tank system, including active tank, intermediate tank, suction tank, mixing tank,, reserve tank, trip tank,etc.

Fully Hydraulic Drive Decanter Centrifuge GNLW363D-FHD for Asia Customer

Recently 6 sets of fully hydraulic drive decanter centrifuge GNLW363D-FHD are ready for delivery for Asia customer.
The fully hydraulic drive decanter centrifuge model is GNLW363D-FHD, the technical configuration is as below:


Bowl size and bowl length is 14 inch by 50 inch, the max speed is up to 3600rpm, the max capacity is up to 200gpm, the main motor power is 45KW, the driving system is VISCOTHERM Fully Hydraulic Drive system. As a leading solids control decanter centrifuge manufacturer in China, GN solids control can produce different size and different type decanter centrifuge, as VFD decanter centrifuge, high speed decanter centrifuge, middle speed decanter centrifuge, Fully Hydraulic drive decanter centrifuge, 3 phase decanter centrifuge, 3 phase disc separator, etc. Especially for the FHD centrifuge, both of the bowl and scroll are drived by hydraulic motor ROTODIFF and hydraulic pump unit by two hydraulic oil circuits. The advantages to use the FHD decanter centrifuge is that it can be used in high temperature ambient for heavy duty with differential speed, compared with the VFD decanter centrifuge, the FHD centrifuge can work continuously without influence of the hot weather.


The features of GN decanter centrifuge:
1. The bowl material is made of duplex stainless steel 2304from centrifugal casting
2. The screw material is stainless steel SS304
3. Screw protection is interchangeable tungsten carbide tiles
4. The solids discharge port and mud distribution port is protected by tungsten carbide inserts
5. The bearing is SKF brand
6. The FHD brand is VISTOTHERM fully hydraulic drive system
7. The electric control is PLC smart control and the main components are ABB, Siemens, etc. famous brand
The fully hydraulic drive decanter centrifuge will be installed on the telescopic skid, feeding by variable speed screw pump, for more information of FHD centrifuge, pls contact with GN solids control.