Drilling Mud Recycling System

Since its establishment, GN Solids Control is always an innovative company that is always striving to research and develop new technologies and upgrade its product fleets to improve its efficiency and help customers to save money. The commitment of keeping its technology and product on the cutting edge keeps GN as a leading manufacturer in the solid control area, not only in China but also in the world range. Recently GN just got the fabrication of a new product-centrifugal type degasser done in its China HQ, and GN is planning its debut at the upcoming largest oil show in Beijing-CIPPE.

This centrifugal degasser adopts many advancing features of similar products from both China and all around the world. It could be applied in many kinds of drilling fluids recycling system to remove the cut-in gas from the drilling fluids for recovering the mud property, maintaining mud viscosity, improving drilling efficiency and reducing drilling cost.
Comparing with GN’s ZCQ series vacuum degasser, GN centrifugal degasser inherited its advantages and also got some new great features below.
1. Compact design and small footprint, with its vertical structure, the centrifugal degasser could be  installed firmly as a very compact equipment , which will leave more space on tank surface for other solid control equipment.
2. Energy saving. The centrifugal degasser is no longer needing a vacuum pump to produce vacuum for removing the cut-in gas out of the mud which will save a lot of energy. And no extra feeding pump is needed for transferring the drilling mud into the degasser unit, which is also a cost and energy saving solution.
3. The impellers could also be used as agitators for preventing the solids settling at the bottom of the tank.
The centrifugal degasser is mainly composted of transmission unit, impelling unit, gas flow manifold, pressurizing unit, coarse piece separating unit and fixing pieces. The structure is simple and it could be manufactured in a short time to guarantee the requirement of some urgent delivery.

This centrifugal degasser is an optimized solids control equipment from the traditional degasser. If you are interested on this unit, please feel free to contact with GN for more information. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com. We will try our best to help your business achieving great success.

GN Solids Control specializes in manufacturing solid control equipment and mud recycling system. Since its establishment in 2007, it always focused on the quality, consistency and cost economy, and help the customers save more and more money during the project process. And among all the solid control equipment, there are there core products that have been proved to be more rugged, durable and reliable which are: shale shaker, decanter centrifuge and cutting dryer.

The mud drilling system is mainly composed of 223 decanter centrifuge, 752 shale shaker and some solid removal units and parts. GN’s 223 decanter centrifuge is also called the baby decanter centrifuge due to its mini size which is specially used for diamond drilling job.  There are great features about the equipment: the bowl material is made from duplex stainless steel SS304 which is manufactured by centrifugal casting. The discharge port is protected by special ceramic inserts or by tungsten carbide tiles which is made by world famous manufacturer with longer working life. The adjustable effluent port makes the pond depth adjustment easier and fast. The pneumatic controlled spring will make the opening of the cover more easily and safely. During the transportation, the bowl lifting bracket can perform as the cover of the protection for the bearings. The bearings are made by the world famous NSK/FAG. The conveyor surface is protected by Tungsten carbide tiles which is more endurable and easy for maintenance. The electric components are controlled by SIEMENS or SCHNEIDER. GN’s 752 shale shaker is also made for the diamond drilling industry. The vibration mode is linear motion with the processing capacity is 200GPM. The adjustable G force could be up to 7.1G. The motors of vibrators are made by OLI or MARTIN which is certified by ATEX, UL or IEC. There are 2 panels of screen installed on the shaker which is pre-tensioned with high quality. Electric components are also made from SIEMENS or SCHNEIDER. And by installing the hydrocyclones on the shale shaker, it could be modified to mud cleaner which can separate even smaller solids up to 20 microns.

Here is the brief introduction of the solid control system for the oil and gas drilling. Welcome to visit www.gnsolidsamerica.com and please send your inquiries to USA@gnsolidscontrol.com. We will try our best to help your business achieving great success.

CBM ( Coal Bed Methane) is very useful resource for people’s daily life. In order to get it out from the underground, it will also need the drilling process. During drilling, it will also need the solid control and mud recycling. GN now can provide the full mud recycling system for the CBM application for the customers in the coal rich area, such as the Shanxi province in China, or the Michigan or Ohio in the US. The scale and size will not be as big as the one used in the oil and gas drilling, but the function and equipment used on the system are similar.

The mud recycling system is mainly composed of the following equipment: 1, shale shaker which is 3 panel, linear motion for the coarse liquid and solid separation. The G force could reach up to 7.5 G at the flow rate of 500GPM. And now GN adopts the latest composite frame screens which will be more endurable, lighter and have more non-blank area. It’s more and more popular with the customers and the price stays almost the same as the old steel framed screens. 2, mud cleaner which is usually equipment with 1 desander, 8 desilter and a lower deck shaker. The mud will be separated further in the hydrocyclones and dries in the lower deck shaker screens. 3, 18 inch 452GNLW decanter centrifuge which could be configured both as the fixed speed or VFD variable speed. The surface of the screw and discharge port are protected by tough tungsten carbide tiles, and the bearings are made by world famous SKF. This product has been purchased by many big companies, such as BAKER HUGHES. 4, There mud tanks which will be used for mud mixing, recycling and intermediate transmission. All the system is equipped with necessary centrifugal pump and mixing hoppers.

Welcome to visit our website www.gnsolidsamerica.com and get more information, send your inquiries to USA@gnsolidscontrol.com . We believe GN could be your one stop shop for the solid control system and help your business to achieve great success.

Not a long time after Western world’s holiday season, here comes another big event in the oriental world, the Chinese New Year. So far the Chinese New Year could be the biggest festival for family reunion. GN Solids Control, as an international but also a traditional Chinese company, would like to greet the best wishes to all of the customers and their families for a Happy Chinese Year.
First we would like to briefly introduce some fun things to do in Chinese New Year. The happies people should the kids, cause they will get new clothes from senior relatives, set off the fireworks, and can get a lot of lucky money from parents or grandparents or relatives. People can go out for temple fair, in which you can find many delicious snacks, great street shows and can send your best wishes to all of your families.

During the past 2016, it was tough and uneasy for everyone. The roller coaster style oil price dropped to 20s dollar in the beginning of the year, and till the end of 2016, it’s still wandering at 50s dollar. Even under such harsh environment, GN still makes its best effort to create value for its customers and help them save money and survive the difficult times. GN never stopped its steps for improving and innovation. It successfully released its new composite frame screens, which will be more reliable and durable and will be more popular with customers. GN also upgraded its core products, such as the decanter centrifuge, shale shakers and so on. All the equipment will work now more efficiently and smart.
Last but not least, happy Chinese new year. GN will be with you to welcome the new 2017. Welcome to visit our website www.gnsolidsamerica.com and get more information, send your inquiries to USA@gnsolidscontrol.com . We believe GN could be your one stop shop for the solid control equipment and help your business to achieve great success.

GN was rewarded a new big order from a Russian customer which includes the solid control equipment of shale shaker, decanter centrifuge and vacuum degasser. The solid control equipment will be serving 10 drilling rigs in the local Russian oilfield.
The Russian came to China to personally investigate and research the local equipment quality and facility situation. After visiting all the potential vendors’ capability, listening to all the local Chinese customer’s feedback, the Russian customer finally chosen GN as its supplier for all the solid control equipment. During the process, GN demonstrated its strong manufacturing capability, great inventory and reliability, and earned the customer’s trust and the order.

Now let’s take a brief look at the equipment the customer chosen. The shale shaker’s G force could be up to 8G and its vibration mode is linear. Its deck angle could be adjusted during working. It’s equipment with 3 screens, which is made of composite frame. The composite frame screen has more advantages over the traditional steel frame screens in terms of durability, toughness, and storage. It has more non-blank area and can work more effectively and efficiently. Now in GN’s Houston warehouse there are about 2000 composite screen in stock, welcome to inquire about the product. The GNLW363CG-VFD decanter centrifuge is a star product, it’s one of the most reliable and mature product during all the product line. Its bowl material is made from duplex stainless steel 2205 by centrifugal casting. The screw conveyor surface and the discharge port surface are protected by tungsten carbide tiles, or some special ceramic inserts. The bearing is provided by the world-famous brand SKF. This product is very reliable and is very popular with customers.

Welcome to visit our website www.gnsolidsamerica.com and get more information, please send your inquiries to USA@gnsolidscontrol.com . We believe GN could be your one stop shop for the solid control equipment and help you business to achieve great success.