Recently one set of drilling cuttings vertical dryer system are ready for delivery to Middle East Client, the client just finished inspection before delivery to inspect the fitting and performance of the vertical cuttings dryer system.
The vertical cuttings dryer system consists of the equipments as below:
1. Vertical cuttings dryer GNCD930G
2. VFD decanter centrifuge GNLW363D-VFD
3. Screw conveyor 2 sets, one as flushing pump of vertical cuttings dryer, one as feeding pump of decanter centrifuge, their control is inside the control panel of vertical cuttings dryer and decanter centrifuge. The decanter centrifuge VFD control panel
4. Screw conveyor, to transfer the drilling cuttings to vertical dryer system continuously. GN produced screw conveyor have been widely used to transfer drilling cuttings, waste sludge with high solids content but less moisture, industrial waste, etc. materials in the world. GN screw conveyor with each section standard length of 12ft, we can make it with different numbers of sections for different transfer length, as 12 ft with 1 section, 24 ft with 2 sections, 36ft with 3 sections, 48ft with 4 sections. There are sealing rubber between sections and fastened with bolts. The connecting shaft between the middle section and the adjacent blade shaft should be securely fastened with bolts, and the blades at both ends of the hinge bearing should have continuity. When the screw conveyor is installed slantly, GN produced telescopic bracket can be used for angle adjustment. The closed plate cover or grating cover can be selected as requirement.
5. Telescopic skid for decanter centrifuge and vertical cuttings dryer on one skid, for convenient transportation and operation. The telescopic skid can be made as integral skid or separate skid according to the site’s requirement.
If you need a customized solution for drilling cuttings treatment system, pls contact with GN solids sales engineer.